저울/기타계측기 >> 이산화염소 >> 설치형 모델 : S200-ClDix
 
재고여부 : 30일 이내
 
특징
CHLORINE DIOXIDE 측정기
- 이산화 염소의 정확한 측정.
- 완벽한 시스템 플러그 앤 플레이
- 시스템 자체 청소


적용분야
화학 및 공정 기술, 물 및 폐수 처리, 냉각수 처리, 식수 및 음료

기능
측정의 원리는 시약 또는 소모품이 없는 정전압 전극을 closedloop에 기반으로 합니다.
그래서 기능의 비용을 줄이고 온라인 물의 손실을 피하십시오.
이산화 염소의 농도 측정에 필요한 모든 WCS는 이산화 염소 측정을 위한 정전기 정형 전극, 전극 pH, 유량의 측정 및 보상, 불투명 한 측정의 방, 폐쇄 루프 등을 포함합니다.
전기 분해에 의한 자동 자동 세척 기능으로 석회석 또는 지방질을 용해시킵니다.

Software & features

2 Digital input Controller stop by external contact Pulse input of measuring water turbine (flow measurement)
2 anlalog outputs 0/4-20 mA electrically isolated, freely configurable Load max. 500Ω, resolution < 0.01 mA
3 relay outputs 2 digital output, freely assignable to control outputs

- 1 as permanent alarme relay

- 1 potential-free NO contact

Max. 250 V, 6A, 1000 VA

Digital relay outputs

2 digital output, freely assignable to control outputs

Per control output 1 potentiel-free make contact

Max. 12 V, 200 mA

Controller 2 separately adjustable controllers On-Off control (with hysteresis), P or PI control
Control behavior On-Off controller with adjustable hysteresis

Pulse – pause controller

Pulse frequency controller

Continuous controller (analog output)

Limit value Minimum and maximum limit value per controller Adjustable time delay (0 …..9999 s)
Digital interface Modbus RTU Slave

 

Constructional design wall-mounted casing S200

Power supply 230 V/AC, +/- 10 % (50/60 Hz)

110 V/AC, +/- 10 % (50/60 Hz)

Consumption16 VA

Display LCD display, 4x20 characters, alphanumeric, backlight Easy operation by means of 5 keys
Dimensions (HxWxD)

160 x 165 x 85 mm

Weight

1.1 Kg

IP index

IP 65

Operating temperature

-20 to + 55 °C Max 90 % relative humidity at 40 °C non-condensing

Storage temperature

-20 to +65 °C

 

Technical characteristics Sensor

Principle Chlorine Dioxide

 

Principle pH

Potentiostatic with one gold ring

Reference used on the pH probe

Combined electrode reference / measure

Ranges Chlorine dioxide : 0.00 to 5.00 mg/L

pH : -2.00 to +16.00

Temperature : -30.00 to +140.00 °C

Resoulution

Chlorine Dioxide : 0.01 mg/L

pH : 0.01 mV Resistor > 5x1011 Ω

Temperature : 0.1 °C/Pt100/Pt1000

Accuracy +/- 2 % Full Scale

Response time

30 s

Chlorine dioxyde Sensor

Material in contact with the middle

Glass/gold

Water temperature max.

70 °C

Pressure max

8 bars at 20 °C

Flow

Between 40 and 120 l/h

Fluctuations Compensated and checked

Temperature

PT1000

pH Sensor

Water temperature max.

70 °C

Pressure max

8 bars at 20 °C

Flow

Between 40 and 120 l/h

Fluctuations Compensated and checked

구성내역
NO.1
Water Control System for PH and Chlorine Dioxide measurement
  셋트일 경우엔 표준 부속품이 포함됨.
일부 사진만 표시될 수 있습니다.


  구성내역

S200-CHLORINE DIOXYDE 1 SET