특징
WAK-CI(300)
염화물(Chloride)/KYORITSU
< 200 - > 300 mg Cl/L (ppm)
< 330 - > 500 mg NaCl/L (ppm)
측정시간:10초
측정횟수:40회
PACK TEST

기능
누구나 어디서나 편리한 수질검사키트이며,폭넓게 사용할 수 있는 수질측정키트입니다.
Polyethylene Tube로 깨지지 않고, 측정시 안전성이 높은 간다 수질 PACK TEST
폐수처리,음료수검사,각종 수질환경 측정에 간이적으로 측정할 수 있는 간단수질측정키트

Model:WAK-CI(300)

Range:< 200 - > 300 mg Cl/L (ppm)

          < 330 - > 500 mg NaCl/L (ppm)

Color Comparison Method:Silver Nitrate

Reaction Time:10sec

Quantity(pcs/box):40

 

* 바닷물에는 염화물 이온이 다량 함유되어 있기 때문에, 검수의 희석이 필요합니다.

 

 

Cautions

1. The Chloride(300) PACKTEST can measure only Chloride ion (Cl-).

2. Residual Chlorine can be measured by:

Residual Chlorine (Free) PACKTEST, ref: WAK-ClO DP

Residual Chlorine (High conc.) PACKTEST, ref: WAK-ClO(C)

Total Chlorine PACKTEST, ref: WAK-T ClO

3. The normal pH range is 6 -10. If necessary, adjust the pH with diluted sulfuric acid or sodium

hydroxide solution.

4. When you add the reagent K-1, keep the bottle vertically and proceed carefully. Start again

from the beginning if more than two drops were added to the sample.

5. Ensure that PACKTEST tube is filled up to the half.

6. Partially undissolved reagent will not affect the measurement.

7. Keep sample temperature in the range 15°C - 40°C. Lower temperature necessitates longer

reaction time.

8. Read the test under a daylight type lamp.

9. Wash carefully the vial before and after use.

10. Put the line back into the aperture after use to prevent reagent spilt.

 

Interferences

Standard colors were determined from standard solutions. Bromide ion, Iodide ion, Cyanide ion and

Phosphate ion can interfere with the reaction and modify the color.